https://www.displayfusion.com/Discussions/RSS/?TopicID=01937ce9-39d9-732a-bb33-91a42ef99caa DisplayFusion RSS: configuring my monitors: Thu, 30 Apr 2026 23:14:34 GMT en hourly 1 https://www.displayfusion.com/Discussions/RSS/?TopicID=01937ce9-39d9-732a-bb33-91a42ef99caa https://www.displayfusion.com/Discussions/View/configuring-my-monitors/?ID=01937ce9-39d9-732a-bb33-91a42ef99caa#2 Mon, 02 Dec 2024 14:32:45 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/configuring-my-monitors/?ID=01937ce9-39d9-732a-bb33-91a42ef99caa#2 DisplayFusion That's not something DisplayFusion can help with unfortunately. I wonder if you could use the built in Bezel correction to minimize those bars though: https://www.nvidia.com/content/Control-Panel-Help/vLatest/en-us/mergedProjects/nv3d/Bezel_Correction.htm ]]> https://www.displayfusion.com/Discussions/View/configuring-my-monitors/?ID=01937ce9-39d9-732a-bb33-91a42ef99caa Sat, 30 Nov 2024 11:51:20 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/configuring-my-monitors/?ID=01937ce9-39d9-732a-bb33-91a42ef99caa DisplayFusion Hello,

I’m experiencing an issue with configuring my monitors:

1 x MSI MAG 345CQR (3440 x 1440)
2 x HP 27-inch monitors (1920 x 1080)
I’m trying to span the display across all three monitors using the Surround function to create one large screen for racing simulations. Unfortunately, on the main monitor (MSI), black bars about 10 cm wide appear on both sides, preventing the screens from merging into a single display.

My previous main monitor was also 34 inches but had a different aspect ratio — it was taller than the side monitors. Currently, all three monitors have a similar height, but the issue persists.

I’d appreciate your help in resolving this matter.

Best regards,
Robert ]]>