DisplayFusion RSS: DisplayFusion 11.0 Now Available!

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Thu, 26 Dec 2024 06:07:39 GMT

That's great to hear, thanks for letting us know!

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Tue, 24 Dec 2024 21:51:55 GMT

Quote:

We're a bit slow right now over the holidays but in the new year I'll pass this to the developers and we'll see what we can find out for you. Thanks!

Jon, I just installed an update released today. The rel notes specified that the trigger issue was addressed. I see that it was.

Thanks much and Merry Christmas!

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Tue, 24 Dec 2024 17:40:59 GMT

We're a bit slow right now over the holidays but in the new year I'll pass this to the developers and we'll see what we can find out for you. Thanks!

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Mon, 23 Dec 2024 18:34:41 GMT

Thanks. Attached. Executed in Outlook, to see launch a Calendar window, a RIGHT-CLICK and Open in New Window. The Calendar should have been positioned on another monitor in a specific location/size. (But you'll see all that in the log )

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Mon, 23 Dec 2024 18:24:35 GMT

Would you be able to help us troubleshoot this issue in 11.0.4? If so, can you send us a debug log by following these steps?

- On the DisplayFusion Settings > Troubleshooting tab, change the Logging drop-down to "L1: Log Minimal" and click Apply
- Reproduce the issue and note the time so we'll know where to check in the log file
- Click the "Export Info to File" button on the Settings > Troubleshooting tab
- Reply with the file attached
- Disable debug logging after sending the log

Thanks!

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Mon, 23 Dec 2024 18:06:11 GMT

Quote:

@sneakyB: What type of triggers do you use, something like "move window to monitor #x when process is opened"? Have you rebooted since installing v11.0.4? We have had some reports that the hooks don't load correctly on the first install for some people.

Thank you. I have rebooted.The triggers use either When windows is created or when Process is created, and are all either move to a location/size, or move to a specific monitor and then set location/size once moved.

So, are you suggesting un/reinstall DF?

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Mon, 23 Dec 2024 17:01:15 GMT

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Mon, 23 Dec 2024 13:48:25 GMT

I have the latest DF version, 11.0.4, on Win 11 (23H2) [22631.4602]. Triggers are not working. None of the triggers are associated with a Monitor Profile.

Much quicker to use. Thanks for that.

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Thu, 12 Dec 2024 18:20:13 GMT

@Psy: That makes sense then, it will work for you again in v11.0.2. Thanks!

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Thu, 12 Dec 2024 18:05:59 GMT

Windows 10 here! :]

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Thu, 12 Dec 2024 18:04:29 GMT

@Psy: It depends on your Windows version but in Windows 11 Ctrl+Win+T is reserved by Windows. DisplayFusion is incorrectly blocking it in v11 and v11.0.1 but we're prepping v11.0.2 with better hotkey checking.

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Thu, 12 Dec 2024 16:40:11 GMT

I use it so rarely I didn't see it was missing in my settings, but CTRL+WIN+T is also impossible to set.

So I took a little time for some tests. All with CTRL+WIN, on an AZERTY keyboard.
No problem: Esc F1 F2 F3 F5 F6 F7 F8 F9 F10 F11 F12 ² ) = Tab A B G H I J K L R U Y Z ^ $ ù * < , ; : ! Apps ScrollLock Break Insert Home PageUp Del End PageDown and all numpad
Can set but then tell its already in use: F4 C M N O P V BackSpace
Can't set at all: & é " ' ( - è _ ç à D E F Q S T W

I never thought before I could use "Apps" key for shortcuts. -_-

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Thu, 12 Dec 2024 15:28:54 GMT

To +1 this, DisplayFusion 11.x is so much faster. Thank you!

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Thu, 12 Dec 2024 13:17:25 GMT

@Ser7: You may need to load and re-save your monitor profiles if they are linked to a specific trigger. Can you give that a try and let me know if it works?

@AGu: That's great news, thanks for letting us know about the monitor profile detection. If you re-save your monitor profiles you should be able to avoid that in the future too. For the about page thank you for the screenshot we'll take a look and get this fixed up as well.

@Psy : That's great to hear about the Settings window speed, we put a lot of work into that. For the hotkey binding we're looking into the Ctrl+Win+W hotkey right now.

Thanks!

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Thu, 12 Dec 2024 11:32:06 GMT

11.0.1 installed, rebooted, still not able to set CTRL+WIN+W.
CTRL+WIN+X is ok.

One good point I forgot, settings panel opening way faster than 10.x is a joy.

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Thu, 12 Dec 2024 09:03:16 GMT

The only flaw I can see now is the overlapping of text by images on the About tab.

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Thu, 12 Dec 2024 09:01:27 GMT

I figured out why my triggers weren't working. The thing is, my triggers are tied to monitor profiles. They weren't working because DF didn't recognize my current monitor configuration. After I loaded the saved monitor profile, the triggers started working right away. Alarm over. Thanks!

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Thu, 12 Dec 2024 08:28:15 GMT

Triggers still not working even with 11.0.1 update. My main trigger is when a specific app is opened, my monitor layout changes. Before v11 it always worked, now it is broken...

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Thu, 12 Dec 2024 03:32:19 GMT

For anyone with the missing CTRL+WIN+X hotkey we have just released DisplayFusion v11.0.1 to fix this. The hotkey will be missing still but you can set it up again in the Settings > Functions tab and it won't block you from configuring it unless you are on Windows 11 24H2 where Windows has reserved this key combination.

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Wed, 11 Dec 2024 18:54:06 GMT

@AGu: Can you let me know the process you're using to replicate the issue? Like you open an app with a trigger configured for it and nothing happens?

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Wed, 11 Dec 2024 18:51:59 GMT

@AGu: Thank you for the information! Would you be able to enable debug logging on the Settings > Troubleshooting tab, restart DisplayFusion, then try your triggers again? After this can you submit your debug info again just like before, the zip file will have your log this way for us to debug further. Thanks!

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Wed, 11 Dec 2024 18:23:04 GMT

Quote:

if you are having the Triggers issue have you rebooted since you installed v11?

Yes, my triggers are not working even after reboot.

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Wed, 11 Dec 2024 18:21:21 GMT

Quote:

Could everyone here with trigger issues send me a copy of your troubleshooting info?

Thanks for your response. I have attached my file.

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Wed, 11 Dec 2024 15:50:43 GMT

@Psy: This is a known hotkey issue and will be fixed in the upcoming v11.0.1 due out soon. Thanks!

RE: DisplayFusion 11.0 Now Available!

Binary Fortress Software — Wed, 11 Dec 2024 15:27:39 GMT

Hello.
v11 update installed, lost some triggers shortcuts.
Rebooted. Still lost, can't reset.
I was using CTRL+WIN+W and CTRL+WIN+X but DF now says Windows reserved them.

Thanks for Steam pinned now combining even if it's still messing with Rockstar Social Club and GooglePlayGames.