https://www.displayfusion.com/Discussions/RSS/?TopicID=0193b81e-e46e-74cd-8c84-baa871182559 DisplayFusion RSS: Latest update broke my setup and I don't think I can get it to work again Sat, 04 Apr 2026 06:30:04 GMT en hourly 1 https://www.displayfusion.com/Discussions/RSS/?TopicID=0193b81e-e46e-74cd-8c84-baa871182559 https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#25 Fri, 19 Dec 2025 14:48:48 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#25 DisplayFusion Ok, let me know if there is anything else in the future you want me to test/run here. ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#24 Fri, 19 Dec 2025 14:47:11 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#24 DisplayFusion We've done some extensive testing across a few different machines here but we can't seem to reproduce it, so we're a bit stuck. We're going to leave this open on our list and see if we come across anyone else with the same issue, hopefully with some more information we'll be able to track it down. You can stay on v10.1.2 in the meantime if that works for you.

Thanks! ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#23 Tue, 02 Dec 2025 16:36:17 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#23 DisplayFusion Both my profiles have "No target scalling (recommended)" selected, on the newer version I tried with different settings but none fixed the issue. What it seems to be happening is that on the older version when I switch to the 16:9 resolution it informs the screen that the new resolution is now 16:9 and not 32:9 anymore but on the newer version this doesn't seem to happen and even if the screen get streetched or centered the screen info is still telling the display that it is still using 32:9. ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#22 Tue, 02 Dec 2025 16:27:33 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#22 DisplayFusion If you re-save your profile with the "No Change" setting for the scaling level in the DisplayFusion Monitor Configuration window, does that fix it up? ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#21 Wed, 19 Nov 2025 00:37:43 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#21 DisplayFusion With the newer version I can't get the monitor to look correctly, what did work with the newer version was to change the resolution directly in NVIDIA Control Panel but this was something outside DisplayFusion and not something I can just save and update on my profile. ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#20 Tue, 18 Nov 2025 20:46:54 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#20 DisplayFusion That's very strange! So just to confirm when you're using your full monitor but want to change to the side-by-side one you load a DisplayFusion profile that's 1920x1080, correct? If so, you might need to re-save the profile with the newer version of DisplayFusion if you get the monitor looking correct open the DisplayFusion Monitor Config window and save the configuration as your 1080p profile. Then try loading this and see if it works. Thanks! ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#19 Fri, 14 Nov 2025 17:31:53 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#19 DisplayFusion Using 11.2 beta the issue is still the same, after changing my monitor to split screen trying to change the target scalling directly only change how the screen fills the distorted rectangle in the middle of the screen as if it was still trying to use a 32:9 screen.

Trying to do the same directly from Windows also didn't work, changing scalling or other settings on Settings > Display behaved the same.

Using NVIDIA Control Panel worked, I had to change to a different resolution and back again to 1920x1080 with 59hz and this time it did adjust the screen correctly filling just half of my screen. ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#18 Fri, 14 Nov 2025 16:49:28 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#18 DisplayFusion Sorry, also let's make sure you're using the latest beta from here as well. It has some monitor config updates:

https://www.displayfusion.com/Download/Beta/ ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#17 Fri, 14 Nov 2025 16:48:54 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#17 DisplayFusion After you set your monitor in side-by-side mode and your PC resolution should be 1920x1080 what happens if you open DisplayFusion 11.2 Beta 7 and adjust the target scaling now? Thanks! ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#16 Thu, 13 Nov 2025 23:21:32 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#16 DisplayFusion My steps to reproduce the issue:

- First my computer is running in fullscreen using the entire ultrawide monitor using my DisplayFusion profile for 3840x1080 resolution and everything is working fine
- Before changing my monitor mode I first switch to my 1920x1080 profile, in version 10.1.2 the screen gets streetched using my entire monitor at this point. When I do this with the newer version my screen stays centered without any streetching with my original settings but I can force it to streetch by changing the target scalling settings
- After DisplayFusion is in its 1920x1080 profile I go to my monitor and change my Picture By Picture settings to divide my display with half the screen using as source my PC and the other half my Console. On version 10.1.2 it works as intended, on the newer version my monitor seems to still be interpreting my PC as if the original resolution is 3840x1080, if it is not using target scalling it stays centered in the middle of the screen and when it has target scalling turned on it streetches as a rectangle with black bars on top and bottom without using the entire 1920x1080 area it is supposed to use

I did not test trying to close DisplayFusion completely and change my PC output directly but I don't see why it wouldn't work considering that with an onder version of DisplayFusion it works, it would be just like if I was setting up my PC to work with a 1920x1080 monitor.

Edit: just an extra, I don't do anything different when testing, if I run the installer for version 10.2.1 everything just works, to make the issue happen I just need to run the auto updater and then it will fail to properly switch to a 1920x1080 resolution using the exact same profiles because I don't lose any of my settings doing this, to roll back I just run the installer again for version 10.2.1 and it reverts everything back to normal as well without the need for me to adjust any settings in DisplayFusion and it just start to work again without issue. The monitor I'm using is ASUS XG49V, I believe the only other difference but probably doesn't have anything to do with it is that in 3840x1080 it runs at 144hz and in 1920x1080 it runs at 60hz because when my monitor is using PBP it limits the frequency to 60hz. ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#15 Thu, 13 Nov 2025 18:58:56 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#15 DisplayFusion I just want to clarify, are you using DisplayFusion to set your monitor resolution or does just having DisplayFusion running cause the display to look incorrect? When you're switching between DisplayFusion versions are you doing anything inside DisplayFusion once it's started to cause the issue? Thanks! ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#14 Wed, 12 Nov 2025 20:12:51 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#14 DisplayFusion I identified it with the resolution of the screen at the time and if it was splitscreen and fullscreen on my monitor and at the end the version installed at the time.

16:9 Splitscreen using 10.1.2 is the one that works
16:9 Splitscreen using 11.1.1 is the one with the issue

both 32:9 fullscreen is when I'm using it using my full resolution with only my pc using the full monitor just in case there is something usefull to compare against. ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#13 Wed, 12 Nov 2025 19:44:50 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#13 DisplayFusion Thank you for the extra information. For the attachments you sent which ones were generating while it looked correct and which ones are when it's not looking correct? Thanks! ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#12 Tue, 11 Nov 2025 21:51:24 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#12 DisplayFusion Hi, I ran the BFCustomerTest64 in all scenarios, both with version 10.1.2 where it works and with the latest version 11.1.1, also attached photos of how it looks on each version when using my profile for split screen, turned my console on just so it was more apparent how the screen is behaving. ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#11 Tue, 11 Nov 2025 20:59:23 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#11 DisplayFusion Hi Danilo, I'm working on fixing this issue and I just have a few questions so we can try to sort this out:

1. From your last post when you ran the utility was your monitor set as a full ultrawide or was it split in 2? We need to get the info while it's split in 2 parts with your console on the right side.

2. Are you using the DisplayFusion Monitor Config or Monitor Profiles at all or are you using Windows to configure your monitor layout?

Thanks! ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#10 Fri, 24 Oct 2025 12:02:56 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#10 DisplayFusion Thanks for sending that over, we'll see if we can look into it for one of our next few betas. ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#9 Wed, 22 Oct 2025 15:42:21 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#9 DisplayFusion Do you need me to upgrade DisplayFusion to the latest version before running this or do I run it with my installed version 10.1.2? Or maybe both?

edit: I did it with both installed just in case ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#8 Wed, 22 Oct 2025 15:39:09 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#8 DisplayFusion Could you run this tool and copy the output to a notepad file, and send it over?

https://www.binaryfortress.com/Data/Download/?DownloadID=495db9ad-a9fe-4bee-a23d-d9cf233a7b1b&Log=0 ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#7 Sun, 19 Oct 2025 21:26:19 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#7 DisplayFusion This is still broken? Any idea if this will ever get fixed? I decided to test the latest version after being using version 10.1.2 but it seems this issue is still broken on any new versions.

I just worry that at some point I will not be able to keep running version 10.1.2 for some compatibility issue and then the main reason I got this software will stop working. ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#6 Fri, 20 Dec 2024 17:08:51 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#6 DisplayFusion I have a similar issue. I update DF via Steam and now my monitor profile on my 21:9 38" ultra wide, which I had split into 3 separate sections on screen, no longer works. ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#5 Thu, 19 Dec 2024 15:05:46 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#5 DisplayFusion Thanks for sending that over. We'll add this to our list to look into and let you know if we need any other info.

Thanks! ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#4 Fri, 13 Dec 2024 02:30:26 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#4 DisplayFusion Downgraded back again to 10.1.2 and did the same test using the exact same profile, test starts at 23:26, I'm sending the log as well in case this helps with a photo of the difference

Edit: Not sure if this helps but on 10.1.2 when I switch profiles my screen blinks a couple of times, probably notifying the screen resolution changes to the monitor, this does not happen on the newer version, the screen just changes without any blinking ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#3 Fri, 13 Dec 2024 02:24:05 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#3 DisplayFusion I updated again to the latest version 11.02 and tried again, the test was at 23:15, I also took a photo of my screen to show how the screen is behaving after the update. ]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#2 Thu, 12 Dec 2024 19:25:04 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559#2 DisplayFusion Could you send me over a debug log? Here are the steps:

• On the DisplayFusion Settings > Troubleshooting tab, change the Logging drop-down to "L1: Log Minimal" and click Apply
• Reproduce the issue and note the time so we'll know where to check in the log file
• Click the "Export Info to File" button on the Settings > Troubleshooting tab
• Reply with the file attached
• Disable debug logging after sending the log

]]> https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559 Wed, 11 Dec 2024 23:47:33 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/latest-update-broke-my-setup-and-i-dont-think-i-can-get-it-to-work-again/?ID=0193b81e-e46e-74cd-8c84-baa871182559 DisplayFusion Hi,

I have an ultrawide monitor 32:9 with 2 different profiles, one to use it as ultrawide with the native aspect ratio of 32:9 and another one to load the screen as 16:9 so I can split my monitor in two to use my computer and get my console on the other half, this worked perfectly until the last update and now when I go to my 16:9 profile it no longer can fill the entire area and it still send to my monitor as if the screen was supposed to be 32:9.

I'm pretty sure that I was using the scale to fit settings before so the image would force fit when using the split screen mode but now it just stay as a small square in the middle of the screen or stretched as if it was still in 32:9, attached an image trying to ilustrate what is going on.

Am I doing something wrong? How can I get this working again? This is a big problem for me because I use this both to play my console as well as when I have to share my screen with someone else since sharing a 32:9 screen makes it unreadable for anyone with a normal 16:9 monitor but it seems that none of the scaling settings are fixing this.

Thanks!

Edit: just an update, I downgraded back to DisplayFusion 10.1.2 and it is now working again so it really is something that changed on v11.0 released today that broke it ]]>