https://www.displayfusion.com/Discussions/RSS/?TopicID=019bfaaa-5f60-7728-a4dc-0784b942d40c DisplayFusion RSS: 6 monitors and monitor profiles Thu, 21 May 2026 14:07:16 GMT en hourly 1 https://www.displayfusion.com/Discussions/RSS/?TopicID=019bfaaa-5f60-7728-a4dc-0784b942d40c https://www.displayfusion.com/Discussions/View/6-monitors-and-monitor-profiles/?ID=019bfaaa-5f60-7728-a4dc-0784b942d40c#2 Tue, 27 Jan 2026 15:13:53 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/6-monitors-and-monitor-profiles/?ID=019bfaaa-5f60-7728-a4dc-0784b942d40c#2 DisplayFusion Yeah we don't support swapping profiles with Nvidia surround, you'll have to enable/disable it manually. This is on our feature request list though so I've added your vote to it.

Thanks! ]]> https://www.displayfusion.com/Discussions/View/6-monitors-and-monitor-profiles/?ID=019bfaaa-5f60-7728-a4dc-0784b942d40c Mon, 26 Jan 2026 14:17:08 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/6-monitors-and-monitor-profiles/?ID=019bfaaa-5f60-7728-a4dc-0784b942d40c DisplayFusion Hi I’m new to Displayfusion and |I’m struggling with setting up profiles and loading profiles, let me first explain what I am trying to do

I have a single PC that I use for a gaming rig and also for my work PC

Desk - I have 2 monitors on my desk a 32” (2560x1440) and 24” (1920x12080) and I use these together
Rig - I have 4 monitors on my gaming rig 3x39” (3440X1440) & a 27” (2560x144).

The 27” and 24” monitors run through single HDMI connection and a switch to switch between them
The 39” are connected via display port and the 32” via HDMI
PC is a I9 with a 4090 (3xDP & 2xHDMI) so can run the monitors

I will only want to use either the rig or the desk at any one time
I have to use NVidia Control Panel and surround to create a single monitor on the rig (rather than using 3 separate monitors) so that has the resolution of 10320x1440

Thus I wanted to effectively have two profiles one for the rig and one for the desk be able to swap between the 2 profiles and assign this to a button on streamdeck

However here’s what’s happening :

When I turn the pc on with the rig connected and select rig profile (which I have saved the last time it was working) I get a single 39” screen and the 27” screen. I have to then enable the two other 39” screen and they are separate and thus I have to re-run surround to re-setup
If I restart after I have set up with surround and the rig turned on then all is fine, but it seems to be swapping between the two setups that is causing the problems

Am I asking to much from Displayfusion / surround or has my lack of technical ability kicked in
Any help would much be appreciated
Thanks ]]>