https://www.displayfusion.com/Discussions/RSS/?TopicID=0af96373-85eb-4082-b1a3-1ff2c1fc4293 DisplayFusion RSS: opening system tray on startup Sun, 19 Apr 2026 19:39:20 GMT en hourly 1 https://www.displayfusion.com/Discussions/RSS/?TopicID=0af96373-85eb-4082-b1a3-1ff2c1fc4293 https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#38 Mon, 03 May 2021 17:48:08 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#38 DisplayFusion Hello,

Glad to hear it's working! If you have any other questions, feel free to reach out to us.

Thanks! ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#37 Sat, 01 May 2021 14:11:41 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#37 DisplayFusion Hi,

I'm very happy to inform that now it's working!
Thank you! ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#36 Thu, 29 Apr 2021 15:28:03 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#36 DisplayFusion Hello,

We've just released beta 11, can you give that a shot and let me know if the issue persists?

Thanks! ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#35 Tue, 27 Apr 2021 13:57:47 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#35 DisplayFusion Hello,

Strange, I'll re-open the issue for us to look into again.

Thanks! ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#34 Fri, 23 Apr 2021 20:11:58 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#34 DisplayFusion Hi,

I have installed beta 10 but unfortunately, it doesn't solve the problem. I've waited for at least a minute after clicking Apply and even tried rebooting the PC but nothing changed.
Attached a troubleshooting log, hope it helps.

thanks! ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#33 Fri, 23 Apr 2021 19:25:19 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#33 DisplayFusion Hello,

This issue should be fixed up in the latest beta, available here: https://www.displayfusion.com/Download/Beta. Please let me know if you still run into any trouble after updating.

Thanks! ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#32 Mon, 19 Apr 2021 18:27:45 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#32 DisplayFusion Awesome, thanks! Let me know if I can help with repro/testing. ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#31 Mon, 19 Apr 2021 18:13:31 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#31 DisplayFusion Hello,

Thanks for confirming that for me. Since we've already released beta 9, I've bumped this up for us to look into for beta 10. We'll see if we can find a work around for this.

Thanks! ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#30 Mon, 19 Apr 2021 17:51:28 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#30 DisplayFusion Hi,

If I close Taskbar Magic, the functionality returns after ~10-20s.
But sadly, not using Taskbar Magic is not an option because nothing else is able to actually hide the built-in taskbar on the primary desktop.
But if you can make DF do it, I'll be happy to let it go.

thanks! ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#29 Mon, 19 Apr 2021 15:57:54 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#29 DisplayFusion Hello,

Interesting, it looks like you have Taskbar Magic running as well. I'm able to reproduce the issue on my end with that running too. If you close that down and restart DisplayFusion, does the issue persist?

Thanks! ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#28 Sat, 17 Apr 2021 12:31:34 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#28 DisplayFusion Hi,

Yes, both are running. ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#27 Fri, 16 Apr 2021 16:21:42 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#27 DisplayFusion Hello,

Thanks for sending that over. If you open up Task Manager and head to the "Details" tab, do you see "DisplayFusionHookApp32" and "DisplayFusionHookApp64" both running?

Thanks! ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#26 Fri, 16 Apr 2021 15:19:10 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#26 DisplayFusion Hello,

This worked. Here's the result.

cheers ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#25 Fri, 16 Apr 2021 15:05:35 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#25 DisplayFusion Hello,

Ah, can you try rolling back to 9.7.1 from the Downloads page on our website, and then sending it over? You should be able to run the installer directly overtop of your current install.

Thanks! ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#24 Fri, 16 Apr 2021 15:01:10 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#24 DisplayFusion Hi,

I don't know what the result of this should be but it still gives me the "Error: Result is invalid. [System.Exception]" response and the html file also contains only this. I've reported this in some other thread but then only the log file was needed so I didn't insist on following up on this issue.

How can this be fixed?

thanks! ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#23 Fri, 16 Apr 2021 14:34:28 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#23 DisplayFusion Hello,

Thanks for sending that video over. Could you also send me a copy of your troubleshooting info? Here are the steps:

• Open the Settings > Troubleshooting tab
• Click the "Export Info to File" button
• Reply with the file attached

I'm currently running your DisplayFusion backup, along with your OpenShell settings. I'm hoping with your troubleshooting information I'll be able to copy over your exact monitor setup as well, and reproduce the issue.

Thanks! ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#22 Fri, 16 Apr 2021 08:36:34 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#22 DisplayFusion Hi,

Here you go. Hope it helps.

thanks! ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#21 Fri, 16 Apr 2021 08:36:13 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#21 DisplayFusion Hi,

Here you go. Hope it helps.

thanks! ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#20 Thu, 15 Apr 2021 19:07:58 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#20 DisplayFusion Hello,

Strange, I can't seem to reproduce this anymore in DisplayFusion beta 8. Could you send me over another video of the issue that's a bit longer? If you could click the apply button in the DisplayFusion settings window, wait about 15 seconds, and then click the start button a few times on the secondary monitor & primary monitor, then run through your fix by opening the OpenShell setting, that would be great.

Thanks! ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#19 Tue, 30 Mar 2021 15:17:42 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#19 DisplayFusion Hello,

I've bumped this up to look into for our next beta.

Thanks! ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#18 Sun, 28 Mar 2021 15:59:12 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#18 DisplayFusion Hello,

Would you please tell me what's causing this?
I'm trying to find a workaround until it's fixed, but opening/closing OpenShell settings doesn't always work (after a few hours of uptime, I have to leave that window open for more than 10 seconds to have the effect and it's very inconvenient and non-scriptable).
I've looked into the registry (compared the full registry dumps taken when the problem is present vs. when it's not) but can't find any probable culprits, so I'm guessing it's some application hook or something else?
Anyway, whatever it is, I'd like to modify my scripted function that runs when a DF window is closed - currently it opens and closes OpenShell settings but this only works reliably at Windows startup or very little uptime.

Thanks! ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#17 Wed, 17 Mar 2021 16:10:26 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#17 DisplayFusion Hello,

We currently have this on our list to look into for DisplayFusion v10, so no news yet.

Thanks! ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#16 Wed, 17 Mar 2021 07:41:28 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#16 DisplayFusion Hi,

Any luck fixing this?

Thanks! ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#15 Tue, 02 Feb 2021 18:59:33 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#15 DisplayFusion Great, thanks! I hope you'll be able to fix it soon. ]]> https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#14 Tue, 02 Feb 2021 18:36:01 GMT Binary Fortress Software https://www.displayfusion.com/Discussions/View/opening-system-tray-on-startup/?ID=0af96373-85eb-4082-b1a3-1ff2c1fc4293#14 DisplayFusion Hello,

Thanks for sending those over. It looks like I was able to reproduce the issue on my end, so I've added this to our list to look into. We'll be sure to let you know if/when we have any news on it in the future.

Thanks! ]]>