DisplayFusion RSS: Speaker output configuration profiles is this possible?.....

RE: Speaker output configuration profiles is this possible?.....

Binary Fortress Software — Wed, 28 Jun 2023 15:47:04 GMT

I don't believe there's another way to do this. If the steps in post #4 don't work there isn't much we can do

RE: Speaker output configuration profiles is this possible?.....

Binary Fortress Software — Wed, 28 Jun 2023 12:31:28 GMT

ok sorry for the thread necromancy, but I have a need for this to happen, more so now on windows 11 where its even more laborious to have to wade through lots of steps to be able to change stereo>5.1.
I've tried to monitor registry etc to see which keys change when you make the change to the settings, but i'm struggling.

anyone else have any pointers on this ?

RE: Speaker output configuration profiles is this possible?.....

Binary Fortress Software — Thu, 21 May 2015 17:10:33 GMT

@shrimants: I've merged your topic into another relevant one. It's not really easy to do, but if the steps in post #4 above work for you, then you can use the script in post #13 (might need to modify it to remove the stuff for killing/launching Kodi), to load a monitor profile and import the correct .reg file to switch it to the right speaker configuration.

Hope that helps!

RE: Speaker output configuration profiles is this possible?.....

Binary Fortress Software — Wed, 20 May 2015 18:06:35 GMT

I have 2 monitors and 1 television. There are 2 use cases:

1) dual monitor, audio comes out of motherboard headphone jack to stereo headphones.
2) Watch movies on TV full screen, audio/video goes via HDMI to AVR as 7.1.

I find that I can switch the audio profile between my headphone output vs HDMI output. I leave the TV monitor as disconnected.

When I want to watch TV, i enable the TV monitor, clone with one of my displays (so i can see what i'm doing) and switch audio device to HDMI. However, the audio device configuration always defaults to stereo.

is there any way to force a specific configuration for the audio device as well as changing the device? If not, is there a separate program anyone can recommend that can do so?

I already know about autohotkey, but that is a last resort, as I would have to learn the scripting language just to solve this single quick issue. I also have macro support on my mouse, in case anyone can suggest a setting that way.

This post was merged on May 21, 2015.

RE: Speaker output configuration profiles is this possible?.....

Binary Fortress Software — Wed, 18 Mar 2015 15:52:36 GMT

Try out the attached script. It will load a Monitor Profile, import your .reg file, then launch Kodi

RE: Speaker output configuration profiles is this possible?.....

Binary Fortress Software — Wed, 18 Mar 2015 00:31:37 GMT

Here's what I ended up writing as a batch file.

regedit.exe /s 5.1.reg
devcon restart =display *ven_1002*
regedit.exe /s 5.1.reg
cd\
cd "Program Files (x86)"
cd Kodi
ping 127.0.0.1
call kodi.exe

This will run my XBMC (Kodi) instance after fixing the sound .REG, then resetting the display, then adding the reg again (hell just in case)
It would be nice if, either when I change resolution with a hotkey or even when I unlock my PC (and sit at the console specifically) it runs that, or at least something similar?

RE: Speaker output configuration profiles is this possible?.....

Binary Fortress Software — Tue, 17 Mar 2015 20:28:17 GMT

Not yet, but you can create a script that will switch the Monitor Profile, and then import the .reg file. Would you like me to provide an example?

RE: Speaker output configuration profiles is this possible?.....

Binary Fortress Software — Fri, 13 Mar 2015 02:16:48 GMT

I think I've got it under control actually, did you add the custom script thing which will run on resolution change?

RE: Speaker output configuration profiles is this possible?.....

Binary Fortress Software — Wed, 11 Mar 2015 20:58:24 GMT

Ok bummer, are those guids changing in the registry for some reason? Maybe if audio devices (like an HDMI TV) are added and removed?

RE: Speaker output configuration profiles is this possible?.....

Binary Fortress Software — Wed, 04 Mar 2015 05:21:11 GMT

Hold development, now importing reg files is NOT updating the speaker configuration in my testing :/

RE: Speaker output configuration profiles is this possible?.....

Binary Fortress Software — Wed, 04 Mar 2015 04:59:24 GMT

I have done testing and confirmed it's safe to do it at the higher "render" level - just resulting in larger REG files
I might have it execute a second script too (if that's ok?)
1 to import the reg and 2 to initiate a videocard reset with DevCon

http://www.avsforum.com/forum/26-home-theater-computers/1482693-workaround-nvidia-hdmi-audio-oenot-plugged-ina-after-resume-sleep-s3-turning-tv-off-then.html

This is a very useful little tool which "re-initialises" your videocard, the .REG import and Devcon combined, should in theory solve my problem.

RE: Speaker output configuration profiles is this possible?.....

Binary Fortress Software — Wed, 04 Mar 2015 04:46:14 GMT

Hi Keith,

Finally had some time to look at this
First things first, there's an issue.

My devices are "renaming themselves" My Panasonic TV is literally called
"{a45c254e-df1c-4efd-8020-67d146a850e0},2"="1 - Panasonic-TV"
However.
My Yamaha receiver, depnding on the timing of me turning on my TV / Amp in order will sometimes be named.
"{a45c254e-df1c-4efd-8020-67d146a850e0},2"="1 - RX-V1075"

That seems a potential issue to me - same device interestingly (note the start of the key)
So what I'm thinking here, is yeah your reg idea is golden but what would be best by me is to actually extract the key all the way up at the "Render" sub tree (take a look at your screenshot, this should make sense)
Otherwise,.......... it should be good? What do you think?

RE: Speaker output configuration profiles is this possible?.....

Binary Fortress Software — Sun, 01 Mar 2015 11:02:13 GMT

Sorry Keith, forgot to get back to you, will get on to this shortly.
(Be damned if I can also re-create the bug on my HTPC right now, but I know, sooner or later I'm gonna sit down and be in 2.0 audio)

RE: Speaker output configuration profiles is this possible?.....

Binary Fortress Software — Tue, 24 Feb 2015 21:18:40 GMT

Ok, I may have found a way to script this. In regedit, can you see if you have a key that looks like the one in the attached screenshot?

If so, can you try the following?

Select that Properties key in regedit, then do File > Export and save it as "Stereo.reg"
Change your audio settings to 5.1, refresh your regedit window, then export that key again as "Surround.reg"
Try importing Stereo.reg, see if it changes back to Stereo, then try importing Surround.reg and see if it changes to 5.1 again

These steps worked for me, but I just want to make sure they work for you before I write up the scripted function

RE: Speaker output configuration profiles is this possible?.....

Binary Fortress Software — Mon, 23 Feb 2015 22:16:12 GMT

I'm on Win7 64, I'll be on Win10 64 in about 18 months

RE: Speaker output configuration profiles is this possible?.....

Binary Fortress Software — Mon, 23 Feb 2015 21:48:41 GMT

I think we can probably do this with a Scripted Function in DisplayFusion. Which version of Windows are you running?

Speaker output configuration profiles is this possible?.....

Binary Fortress Software — Sun, 22 Feb 2015 07:57:22 GMT

Hi all, Keith especially.

Long story short, I need to set the configuration for my speakers, for my audio device to be 5.1 not 2.0 (note, I need to 're-set it', regularly)

Long story not short:
I use hibernate, remote desktop, teamviewer etc on my Home Theatre PC.
Eventually, I obviously actually sit in my loungeroom at the actual HTPC keyboard and resume from hibernate or close existing RDP sessions from my other computers etc etc - I then fire up XBMC (Kodi)

The issue is that Windows has forgotten my 5.1 speakers.
I don't know if this is due to my ATI / AMD video card which passes into my Yamaha receiver? Who knows.
Ultimately the cause of this is either turning off the TV / or the Amp, or hibernating the HTPC or 'closing off' the existing Windows session into an RDP session.
This is frustrating when I launch a game, use Kodi or Winamp and audio will only come out of the front speakers.
Then need to quit the application, open the sound configuration panel and re-configure my device, then re-enter the app

I'm fairly confident you've added a way to configure which output device we can now output from, but can you drill into the registry somehow and have it so that we can force the speaker configuration based on an audio profile?

Here's my follow up questions.
1: Can we "bind" an audio configuration option to a monitor profile? Therefore all I need to do is set a monitor profile back, and then forth with a hotkey to reset my audio settings.
2: Can we invoke a monitor profile (or audio profile,... or both if you 'bind' them) through a batch file argument? So my shortcut to XBMC/Kodi would become
c:\blah\blah\displayfusion -profileselect
c:\blah\blah\kodi\kodi media playerblah.exe
?

Finally......
If none of this is currently possible, might I suggest an 'advanced profile switcher tool' which let's us assign a monitor configuration to not only change the monitor settings but execute some kind of script? I could have some kind of regedit, which imports a .REG file, once I figure out where the configuration for my 5.1 speakers are, vs the 2.0 it keeps reverting to.

I apologise for the length of the post, hope it makes sense?
NOTE: I'll be persuing this issue over at the XBMC / Kodi forums too, see if anyone else is having similar issues.