I am having issues with this feature on my desktop setup. Everything goes black, but no video plays. My monitors are 2 on top and 2 on bottom. I'm trying to play mp4 format, both large and small files.

Here's my setup (if you need more info, ask)

Windows 7 Enterprise SP1 64-bit
16 GB memory

2 NVIDIA GeForce GTX 660 SLI together

NameNVIDIA GeForce GTX 660
PNP Device IDPCI\VEN_10DE&DEV_11C0&SUBSYS_30633842&REV_A1\4&12B449C0&0&0009
Adapter TypeGeForce GTX 660, NVIDIA compatible
Adapter DescriptionNVIDIA GeForce GTX 660
Adapter RAM(2,147,483,64 bytes
Installed Driversnvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver Version9.18.13.4752
INF Fileoem41.inf (Section035 section)
Color PlanesNot Available
Color Table Entries4294967296
Resolution1920 x 1080 x 60 hertz
Bits/Pixel32
Memory Address0xF4000000-0xF4FFFFFF
Memory Address0xD0000000-0xD7FFFFFF
Memory Address0xD8000000-0xD9FFFFFF
I/O Port0x0000DF80-0x0000DFFF
IRQ ChannelIRQ 17
Driverc:\windows\system32\drivers\nvlddmkm.sys (9.18.13.4752, 9.81 MB (10,284,872 bytes), 2/20/2015 12:18 AM)

Ditto for me too, but this is for the screensaver using my desktop PICTS. Screens goes black, but nothing after that. Wallpaper works fine, just not screensaver. Any suggestions?

Also can you walk me through the video wallpaper process? I have not tired this yet.

Windows 10 preview build 14372 16 GB RAM.

I installed that, and still only have the black background show up with no video overlay.

Can I try something else?

@john

You have to be on the Beta version of Display Fusion. You can allow for this in your settings.

To enable your video wallpaper: Right click desktop, choose Display Fusion > Desktop Wallpaper. Under wallpaper source, change the source to "my videos". When you do this it should ask you to point to a video to use as a wallpaper. If it doesn't you can click load video to make a selection. Then hit apply/ok and you SHOULD have a video wallpaper.

Thanks for the info. I found the settings and applied them, but got the same results you did: no video overlay.

Perhaps displayfusion support can offer some insight.

Also, I too have a four monitor configuration with no screensaver function with my PICTS.

Need suport!

Thanks!

Hey Keith,

That seemed to do it. Working now with the video overlay. Very cool!

Now everything is working again, including the Displayfusion Photo screensaver with my PICTS.

Thanks!

@keith
I've tried span across all, use different for each, use same for each and I no option is showing video.

Here's one. The other one is much too large.

I don't see DebugInfo.html in the folder I was directed to. Also, on the troubleshooting tab, I see "Error: Result is invalid." on the dialog window.

I made sure to reinstall CCCP and reboot. This did not solve my issues. I tried it on one monitor at a time, and the one monitor went black and the other 3 went grey.

Let me know what I can do next to help solve the issue.

Windows should be up to date. I've attached the settings.