I am trying out the latest version of DisplayFusion and currently facing an issue with the triggers.

One of the triggers works perfectly until I reboot. After the reboot one of them stop working. I tried restarting the program and the service but did not help.

The trigger is set to wait for 10 seconds before it starts. I tried with different setting but no changes.

The trigger is suppose to work each time the external screen is turn on or off. I configured 2 different profiles for it.

Each screen has a different resolution and a different default sound speaker setting set for it.

The trigger is suppose to launch a batch file because I need to reset a program. The program uses screen macros that need to be reset when the screen is extended or back to normal.

Is there a solution for this?

Can anyone advise on this?

Thanks for responding

Here is the requested screenshot.

I did a test with a notification and nothing changed. No notifications.

Anyway, when it was working before the reboot, it work normally when launching a batch file. So I can see a CMD console window. It worked for almost a week before I restarted.

This is the 2nd time it did not work. About 2 weeks ago I created another trigger that also worked for a while before it stopped that was more or less the same as this one.

It seem to get the ball rolling again if I save the profiles again.

But this should be automated. Any comments?

I will update here after I do a reboot which is not today.

You are correct to ask that.

No it does not detect any particular profile. Seems to just be on Default.

Is there a way to load a profile from a shortcut or a hotkey without having to access displayfusion to get it going again?

The loading of the profiles did not work. It still does not seem to detect the profile, even after loading it. So far it only shows the detected profile after it is saved and then the triggers start working again.

Any tips on this?

Thanks

I did a quick test now and got the same results.

It did not detect the profile after the boot up either while loading the profile right away.

Do you have any tips or idea of why it is not working?

I would need to set each profile and save it for the triggers to work. Not just one.

I am unable to comply with your request to share such info because it includes information about my system as well.

Please give me a new tip or idea.

Can anyone respond?

That won't be possible either.

Can you narrow down the information that is required. It is huge and too much to filter out.

But it is divided into sections. So Just specify the section that you need and I will do it.

Thank you for your patients.
The requested section does not contain any differences either before or after saving the profile.

Is it possible to save the profile without having to open that page?

Do you have other suggestions to try to get it to detect the profile?

Nevermind!

I got it solved using a different program called Autohotkey.

I checked online if it was possible and saw some threads in regards to similar requests. So then I posted a request and got the solution in about 24 hours. It works very well.... so far.

Here is the Autohotkey thread and solution.

https://www.autohotkey.com/boards/viewtopic.php?p=457162#p457162