Display fusion seems to have lost the ability to toggle or work with Nvidia surround properly since GeForce 320.49 Driver or so. (guessing about 6 months ago) I used to be able to toggle between my 3 screens all running in a linked 5760x1080 mode and a 3 monitors, each with 1920x1080 mode. Basically nvidia surround on and surround off. When I try to switch from one (5760) to the other(3x1920)I get something similar to this:

An error has occurred while applying your new Monitor configuration.
Please check your settings and try again.
Error: Failed to call SetDisplayConfig. [HR: 87]

When I toggle surround mode off via the alt-control-s shortcut or by going into Nvidia control panel -> 3d settings -> Configure Surround -> [un]check "span displays with surround, I am then able to set the 3x1080 mode.

Any ideas? I would like to be able to toggle between the two using display fusion and not have to take several steps if possible.

Thanks in advance!

I just ran into the same problem after switching to Nvidia... I can confirm that as long as you toggle surround manually it works just fine .

Did you add support yet. This is the one reason I bought this software and it doesn't seem to work.

Just lost another customer as you've not yet implemented this in the last year and a half.
I am looking for something to do exactly this and would have paid for your application without a second thought.

I too will buy this if you add this feature, there is more i like about the software, but this will put the icing on the cake and force me to buy, but note if i find something else in the mean time that does this then i will buy that instead, Regards.

Still need this feature.