Processing Ajax...

Title

Message

Confirm

Confirm

Confirm

Confirm

Are you sure you want to delete this item?

Confirm

Are you sure you want to delete this item?

Confirm

Are you sure?
If you are experiencing any issues with your desktop wallpaper or taskbar buttons
please download and install the latest DisplayFusion beta version before contacting support.

User Image
Balder
7 discussion posts
I have two profiles that I switch between frequently, and it has always been pretty fast, usually just a couple of seconds. After upgrading it has became very slow - 30-45 seconds. No errors pop up.

My profiles are pictured in the attached image. Is there some new configuration that I have to do to make it work again or should I just downgrade?
• Attachment: dfprofiles.png [408,474 bytes]
dfprofiles.png
dfprofiles.png
20 days ago  • #1
Owen Muhlethaler (BFS)'s profile on WallpaperFusion.com
Could you send me a debug log? Here are the steps:

  • On the DisplayFusion Settings > Troubleshooting tab, change the Logging drop-down to "L1: Log Minimal" and then click "Clear Log"
  • Reproduce the issue and note the time so we'll know where to check in the log file
  • Click the "Export Info to File" button on the Settings > Troubleshooting tab
  • Reply with the file attached
  • Disable debug logging after sending the log
19 days ago  • #2
User Image
Balder
7 discussion posts
I have attached the log. I changed to the "Gaming" profile at approximately 15:01 and immediately after back to the "42+34+(77)" profile.

For whatever reason it actually seemed faster than usual, though still much slower than before the upgrade. maybe 20 seconds or so - I didn't time it.
• Attachment [protected]: DisplayFusionDebugInfo.zip [236,205 bytes]
16 days ago  • #3
User Image
Adamvs_Maximvs
2 discussion posts
Been experiencing this myself as well. Use shift+ctrl+1 (or 2) two change between profiles (4K 60Hz, 3440x1440 @144hz)

Upon changing it becomes non-responsive about a minute and a half, then becomes insanely laggy, around 10-15 seconds of lag from an input for about a few minutes. Takes about 2min 55s for a full profile change. Seems to correct itself after that.

Using the version I have via Steam build 22134110 and attached the debug log following the instructions you posted earlier.

Hopefully it helps, really like the software but something either in a driver update or a DF update seems to be causing an issue. Never occured until the last month or two.
• Attachment [protected]: DisplayFusionDebugInfo.zip [161,533 bytes]
13 days ago  • #4
Owen Muhlethaler (BFS)'s profile on WallpaperFusion.com
Can you roll back to this version and let me know if the issue persists? https://www.binaryfortress.com/Data/Download/?DownloadID=0194b3f6-3ce1-76c8-a1e2-01a8931823b7&Log=0
11 days ago  • #5
User Image
Balder
7 discussion posts
Downgrading to 11.1.1 solves the issue.
6 days ago  • #6
Keith Lammers (BFS)'s profile on WallpaperFusion.com
Thanks for confirming! I will pass your logs and this info over to our developers to take a look at.
4 days ago  • #7
User Image
Adamvs_Maximvs
2 discussion posts
Apologis I meant to test this out too on the weekend but got swamped.

Testing it out this week, it's back to it's snappy normal on the steam version,so it's possible it was an Nvidia issue (for me at least) as they've updated their drivers, but the steam build ID is the same.
4 days ago  • #8
Keith Lammers (BFS)'s profile on WallpaperFusion.com
Glad to hear it's all good now, thanks for the update!
2 days ago  • #9
User Image
Balder
7 discussion posts
For me changing Nvidia drivers did not change anything, sadly - but for now it works as long as I stay on 11.1.1
2 days ago  • #10
Subscribe to this discussion topic using RSS
Was this helpful?  Login to Vote(-)  Login to Vote(-)