Title

Message

Confirm

<< DiscussionsReply

Windows go behind taskbar when snapped on Windows 11 10.0 Beta 6

turbocharg3d
10 discussion posts
Hey,
I just upgraded to Window 11 and updated to the newest beta of DF, except now when I snap a window on either of my side monitors the content goes behind it like this (see attached file). It seems like it snaps to full screen ignoring the DisplayFusion task bar.
-
I didn't change any of my settings and it seemed to work fine when I first installed Beta 6, is there a setting I'm missing or something?
Thanks!
-
Edit: If I exit DF and reopen it it seems to cause the windows to snap properly, it seems like DF needs to be exited and reopened on boot otherwise windows ignore the taskbars.
-
Edit 2: Seems like even that is inconsistent, it took exiting and reopening 3 times for the snapping to work correctly.
• Attachment: DF.png [212,436 bytes]
DF.png
DF.png
Oct 22, 2021 (modified Oct 22, 2021)  • #1
turbocharg3d
10 discussion posts
I've managed to accomodate for this a bit:
Disabling every application that opens on startup that also pops up with a window seemed to fix it (Dicsord, Spotify, etc) I'm wondering if this is happening because they open first, then DF opens and then it messes up the snap area size
Oct 23, 2021  • #2
Owen Muhlethaler (BFS)'s profile on WallpaperFusion.com
Hello,

Interesting, is this only happening with those applications on startup?

Thanks!
Oct 25, 2021  • #3
turbocharg3d
10 discussion posts
Quote:
Hello,
Interesting, is this only happening with those applications on startup?
Thanks!

Yeah it was just those two, Spotify and Discord, I have a few other applications that open but without a window popping up but those don't seem to have any effect.
Oct 25, 2021  • #4
turbocharg3d
10 discussion posts
I tried playing with the startup settings of Spotify/Discord to open minimized instead and reenabled them which didn't fix the issue
Except now even with them disabled my windows snap behind the DF taskbar again
Oct 25, 2021  • #5
Owen Muhlethaler (BFS)'s profile on WallpaperFusion.com
Hello,

Sorry let me re-word my last question. Does this only happen when those applications open on your initial boot?

Thanks!
Oct 25, 2021  • #6
turbocharg3d
10 discussion posts
Quote:
Hello,
Sorry let me re-word my last question. Does this only happen when those applications open on your initial boot?
Thanks!

That's what I thought at first, but it might be unrelated. I temporarily enabled them on boot to test them with "open minimized at boot" settings but it made no difference. I then disabled them at boot but now windows are back to snapping back behind the taskbar.
Oct 25, 2021  • #7
Owen Muhlethaler (BFS)'s profile on WallpaperFusion.com
Hello,

Okay, interesting. Could you send me over a debug log? Here are the steps:

  • On the DisplayFusion Settings > Troubleshooting tab, change the Logging drop-down to "L1: Log Minimal" and click Apply
  • Reproduce the issue and note the time so we'll know where to check in the log file
  • Click the "Export Info to File" button on the Settings > Troubleshooting tab
  • Reply with the file attached
  • Disable debug logging after sending the log

Thanks!
Oct 26, 2021  • #8
turbocharg3d
10 discussion posts
Sure thing, I've attached the DebugInfo .zip file.
I did a fresh boot and Displayfusion started at 10:21 AM, the taskbars on both of my side monitors appeared, and immediately windows I opened would snap behind the taskbars that DisplayFusion opened.
• Attachment [protected]: DisplayFusionDebugInfo.zip [150,353 bytes]
Oct 26, 2021  • #9
Owen Muhlethaler (BFS)'s profile on WallpaperFusion.com
Hello,

Thanks for sending that over. I've attached a link below to beta 5, can you let me know if the issue persists there as well?

Thanks!

Beta 5: https://www.binaryfortress.com/Data/Download/?DownloadID=e46c42f1-1d02-4eef-849d-2688d7cb4192&Log=0
Oct 27, 2021  • #10
turbocharg3d
10 discussion posts
Beta 5 seems to work fine, window snapping was right immediately on boot.
Oct 27, 2021  • #11
turbocharg3d
10 discussion posts
Update: Beta 5 seems inconsistent as well, restarted computer to the same issue as Beta 6
Oct 28, 2021  • #12
Owen Muhlethaler (BFS)'s profile on WallpaperFusion.com
Hello,

Interesting, I've attached links for beta 4 and 3 below as well. Those should be the last 2 betas with changes for Windows 11. Can you try those out and let me know your results?

Thanks!

Beta 4: https://www.binaryfortress.com/Data/Download/?DownloadID=230f73c6-2d22-4fa6-9415-d1ec8326f509&Log=0

Beta 3: https://www.binaryfortress.com/Data/Download/?DownloadID=a327a0bf-dba2-47b2-85b9-11a8f2e88ade&Log=0
Oct 28, 2021  • #13
turbocharg3d
10 discussion posts
It seems like it's the same issue as with Beta 5/6, although I've noticed that if I don't open any windows for a few minutes it then registers the proper "work area" resolution and doesn't go behind the taskbar.
Nov 3, 2021  • #14
turbocharg3d
10 discussion posts
Just an update, I saw Beta 7 was available so I installed it and tested it out, I'm still having the same issue as with Beta 3/4/5/6/7
Nov 7, 2021 (modified Nov 7, 2021)  • #15
Owen Muhlethaler (BFS)'s profile on WallpaperFusion.com
Sorry for the delay, we are taking a look into this
15 days ago  • #16
Was this helpful?    
<< DiscussionsReply